JUPITER II 120 models are three- and four-plough bodied mounted reversible ploughs designed for tractors from 70 horsepower. During construction emphasis is placed on low weight combined with long service life of all components.

Product description

JUPITER II 120 models are three- and four-plough bodied mounted reversible ploughs designed for tractors from 70 horsepower. During construction emphasis is placed on low weight combined with long service life of all components. The plough frame is constructed from a high-strenght 120 x 120 x 10 mm square steel tube giving the plough stiffness and durability. The most durable materials are also used for other parts of the plough which are further refined in order to achieve a high quality product with high utility value. The JUPITER II 120 plough is made in two versions according to the spacing between the plough bodies, specifically JUPITER II 120/90 and 120/100.
  1. Rotary head
  2. Spring / shear bolt protection
  3. Plough body
  4. Disc coulter
  5. Frame
  6. Depth weel

main advantage of the machine

Simple construction and emphasis on low weight predetermine the plough for aggregation with lower power ranges tractors. Despite the weight optimization, all the advantages and benefits of the JUPITER plough, which have been retained, are given by the use of the highest quality production materials. JUPITER II 120 is the light plough for small tractors. The target group is small farmers, who have a smaller tractor with a lower number of horses and therefore need a light plough. The whole plough is made with respect to weight. Construction team designed the materials to optimize the weight. JUPITER II 120 is proven simple machine.



Tradition of plough production since 1995

The plough combine years of experience with use of modern production technologies

Precise processing to the smallest detail

High-quality processing ensures your long-term satisfaction and precision work

We have our own production of wear parts

Wear parts made of special abrasion-resistant steel have a long service life

Spacing of plough bodies 90 and 100 cm

It allows you to adjust the overall length of the plough and thus reduces the weight and load requirements of the tractor

Modular frame system 3 + 1

Allows shortening or extending the plough by 1 ploughshare at any time

Clearance under the frame 80 cm

Ensures trouble-free passage of post-harvest residues under the frame, thus preventing clogging

Selection of 5 types of plough bodies

The well-chosen type of the plough body ensures high-quality work even in the specific conditions of your farm

Two types of plough body protection

The plough can be fitted with: shear bolt protection – for stone-free soils spring mechanism protection – for stony soils

Mechanical adjustment of the width of plough bodies

By mechanical re-adjustment, it is possible to change the width of plough bodies in the range of: JUPITER II 120: 30/35/40 cm JUPITER II 140: 33/39/44 cm


JUPITER II mounted ploughs are intended for aggregation with smaller tractors or for ploughing smaller fields. The smallest ones, located in the type series 120 marked, start on three coulters, while the modular system allows the plough to be extended to four coulters at any time. The Jupiter II 120 plough is thus suitable for aggregation with tractors up to 70 hp, but the main role is firstly soil type and own tractor.


Basic equipment

  • Basic equipment
  • Modular system 3 + 1
  • Adjustable width 30/35/40 cm
  • 80 cm underframe clearence
  • Plough bodies including trashboards
  • Knife coulters on the last pair of plough bodies
  • Shear bolt or spring mechanism protection
  • Rear reflexive plates
  • Suspension shaft cat. 2
  • Frame profile 120 x 120 x 10 mm

Additional equipment

  • Disc coulters
  • Skimmers
  • Memory cylinder JUPITER II
  • Combined wheel JUPITER II
  • Floation tyre 10.0/75-15.3
Variation – Disc coulters
Variation – Skimmers
Variation – Memory cylinder JUPITER II
Variation – Combined wheel JUPITER II
Variation – Floation tyre 10.0/75-15.3

Technical parameters

Technical parameters JUPITER II 120/90 JUPITER II 120/100
Number of ploughshares   [pcs] 3 4 3 4
Working width of one ploughshare [cm] 30/35/40 30/35/40 33/39/44 33/39/44
Total working width of the plough [cm] 90/105/120 120/140/160 99/117/132 132/156/176
Clearance under the frame [cm] 80 80 80 80
Spacing between the plough units [cm] 90 90 100 100
Recommended operating speed  [km/h] 7 7 7 7
Plough weight *        
- shearing [kg] 965 1175 970 1180
- spring [kg] 1140 1395 1145 1400
Tractor output [hp] 72 - 95 95 - 120 72 - 95 95 - 120

 *The weight is only indicative and may vary according to the selected machine.